The 10" Vacuum Cup from Matthews is equipped with a cheese plate and has a heavy-duty style without 5/8" pins. Pump it until the red marker disappears to create a bond to non-porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4-Way Tilt Plate and camera tie-down strap. (sold separately).
Matthews 10" Vacuum Cup with Cheese Plate
19 NIS ·
For top shots.
Specifications:
Length6.75 in (17.14 cm)
Width2.09 in (5.32 cm)
Height1.04 in (2.64 cm)
Weight0.44 lbs (0.2 kg)
Primary MaterialBlack Aluminium
Secondary MaterialStainless Steel Bolts
Camera PD Bracket
9 NIS ·
The DG9038CA 3-Joint Mounting Arm with 1 AD4000 Quick Release Adapter from NOGA features a 1/4" threaded top and a 3/8" bottom. The arm is suitable for use with a wide range of cameras as it attaches easily via a standard 3/8"" and 1/4"-20 screw.
Supporting a monitor or camera light, the arm can be moved to the left or right of the lens, raised or lowered, and even tilted up or down to provide the clearest view or to get just the right angle for the job. The arm comes with an integrated 1/4-20 AD4000 quick release adapter. The adapter allows for fast removal of accessories or arm by a pull to release connection.
Noga Joint Mounting Arm with Quick Release Adapter
9 NIS ·
The extreme Standard shoulder rig version is supplied with: Bars Module, 18 cm Bars, QR Camera Mount, Curved Grips Module, Padded Shoulder Brace, Back Acc. Tray and Back Balance Weight.
DVtec Handheld Rig Extreme Standard Kit
59 NIS ·
Professional boxes in various sizes: 40cm, 20cm, 10cm, and 5cm. Used on film sets for adjusting camera height, supporting equipment, and as seating. Sturdy wood construction.
Apple Box Cube - Various Sizes (40/20/10/5)
9 NIS ·
Magliner professional production cart. Lightweight aluminum construction. Used on film sets for transporting equipment. Foldable for easy transport and storage.
Magliner Cart
79 NIS ·
The clamp is made of lightweight cast alloy and has reduced size as its most important feature. The clamp comes with high friction tape which improves the grip, high performance aluminum. Moreover, the flexibility given by the two 3/8 and 1/4 attachments makes the clamp practically compatible with any lighting accessory in the market. It is a very versatile tool that holds just about anything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps.
Specifications
Ideal for articulating magic friction arm
Suitable for 1/4" and 3/8" screw heads.
Made of durable aluminum alloy.
Supports up to 8lbs of payload
Pull and lock aluminum handle
Grips round or flat surfaces
Stainless steel internal components
maximum clamp opening: 1- 19/32"
maximum jaw opening: 1- 15/32"
Small Super Clamp / Nano Clamp
9 NIS ·
The rig features 14" long 15mm rods running through the baseplate and a rod-mounted shoulder pad connected to these rods by an offset bracket. The shoulder pad has a 2.2 lb counterweight attached to it via a weight plate. The handlebar up-front supports both 15 and 19mm rods.
Vocas Handheld Kit
59 NIS ·
The Hotshoe Ball Mount is an omni-directional mount, and mounts an EVF (electronic view finder) monitor onto a camera hotshoe. Equipped with a quick locking mechanism, the mount firmly attaches to the camera and can be released with a flip of a lever. It comes with a standard 1/4-20 male screw and a 1/4-20 female screw hole to mount camera accessories.
Hotshoe Ball Mount
3 NIS ·
The Matthews Suction Pump Cup. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Matthews Suction Pump Cup with Camera Mount
19 NIS ·
The base matches with hot shoe interface with 1/4”and3/8”screw holes.Umbrella hole is available in the middle.There is hot shoe base in the upper part.It is applicable for all the standard specifications of the tripods and digital and single lens reflex.
